Valeton GP50 + MVAVE Chocolate V1/PLUS

Connect GP50 and Chocolate V1/PLUS via Bluetooth

Choco plus > USB > GP5

Before you start:

  • Do a factory reset on the gp50. A lot of problems with connections with gp50 are fixed making a factory reset.
  • MIDI communication between gp50 and chocolate only accepts CC Codes.
  • Use a TRS 3.5mm cable also known as stereo audio cable like these. For the original Chocolate you will need an adapter.
Midisuite
1 - Connect Chocolate

Connect to the chocolate pedal using Midi Suite (download from m-vave site)

Midisuite
2 - Set Mode

In chocolate v1 set the mode to "Advanced Custom Mode"

Midisuite
3 - Select footswitch

Choose one of the footswitchs

Midisuite
4 - Edit Command

Select the pencil icon to edit the command or erase and add a new one

Midisuite
5 - Enter CC code

Select type: CC
When using MIDI you can only use CC or PC codes.Enter the desired code, press save.

MIDI
7 - Check the midi settings in the chocolate

go to the initial screen in midisuite and press the arrows button.

MIDI
7 - Check TRS MIDI

Check that the TRS mode is selected, and the polarity reversal is not on.

USB
8 - Connect Cable

Connect a trs midi cable to the gp50 midi in port and to the chocolate Pedal out. If using the Choco original you have to use an adapter for the large jack.(3.5mm to 1/4'')

USB
8 - Test

If everything is ok, now the chocolate is controlling the gp5 via midi.

Useful links: